Rogers RO3010 laminates are ceramic-filled PTFE composite suitable for applications up to 77 GHz. It exhibits a dielectric constant of 11.20 at room temperature, which remains stable up to 40
Rogers CuClad 217, CuClad 233 and CuClad 250 series laminates are woven fiberglass/PTFE composite materials for use as printed circuit board substrates.The woven fiberglass reinforcement in CuClad products provides greater
The IsoClad 917 and IsoClad 933 series boast a low dielectric constant (Dk ≈ 2.2–2.33 at 10 GHz), minimizing signal propagation delays and phase distortions. With an ultra-low dissipation factor
The dielectric constant of this TFA series is 2.94, 3.0, 6.15, 10.2. With the same level of dielectric constant excellent electrical properties, thermal properties, mechanical properties, is aerospace grade high
F4BTM and F4BTME laminates offer a dielectric constant (DK) ranging from 2.98 to 3.50, selectable based on design needs. Lower DK variants enable wider impedance control and reduced signal delay,
EZ-IO-F is a thermally stable composite that leverages nanotechnology, spread weave fabric, and PTFE to deliver superior performance. Designed to challenge even the best FR4 materials in complex, multi-layered digital
Shengyi SCGA-500 GF220 is a low-loss PTFE woven glass PCB material, specifically engineered for high-frequency applications. With a dielectric constant of 2.20(±0.02) at 10GHz, the laminate maintains outstanding dielectric stability
Shengyi SCGA-500 GF255 is a low-loss PTFE woven glass PCB material, specifically engineered for high-frequency applications. With a dielectric constant of 2.55(±0.04) at 10GHz, the laminate maintains outstanding dielectric stability
Shengyi SCGA-500 GF265 is a low-loss PTFE woven glass PCB material, specifically engineered for high-frequency applications. With a dielectric constant of 2.65(±0.04) at 10GHz, the laminate maintains outstanding dielectric stability
Shengyi SCGA-500 GF300 laminate is a low-loss PTFE woven glass PCB material, specifically engineered for high-frequency applications. With a dielectric constant of 3.00(±0.04) at 10GHz, the laminate maintains outstanding dielectric
Shengyi SG7350D2 laminate have a low dielectric constant of 3.55 at 10 GHz, maintains outstanding dielectric stability across various frequency and temperature ranges. Shengyi SG7350D2 laminate is a high-performance laminate
The LNB33 laminate is characterized by a high glass transition temperature (Tg) exceeding 280°C. The dielectric constant (Dk) of LNB33 laminate is approximately 3.30±0.05 at 10 GHz (as per IPC-TM-650
The LNB33C laminate is characterized by a high glass transition temperature (Tg) exceeding 280°C.The dielectric constant (Dk) of LNB33C laminate is approximately 3.30 ± 0.05 at 10 GHz (as per
N9000-13 RF is a PTFE Performance Blended product which combines the RF electrical properties of PTFE with the competitive performance features of AGC’s proprietary N4000-13 epoxy. including a stable Dielectric
TLY-5A laminates use ultra-lightweight woven fiberglass, offering superior dimensional stability. The material's woven structure enhances mechanical stability for high-volume manufacturing. Its low dissipation factor enables efficient performance in 77 GHz
These AD250C™, AD255C™, AD300D™ and AD350A™ Series antenna products are glass-reinforced, PTFE-based composites that offer controlled dielectric constants, low-loss performance, and superior passive intermodulation (PIM) characteristics.
Rogers CLTE-XT PTFE laminate have a dielectric constant (Dk) of 2.94 at 10 GHz at the same frequency, CLTE-XT ensures minimal signal degradation and excellent efficiency. It's ultra-low loss tangent
TLY-3 offers a compelling solution for tackling the challenges of high-frequency applications. With an ultra-low dissipation factor, TLY-3 minimizes signal loss and heat generation, making it ideal for high-power and
TC600 is a woven fiberglass reinforced, ceramic-filled PTFE composite for printed circuit boards. It offers high thermal conductivity, reducing dielectric and insertion losses, and improving amplifier and antenna performance. Its
CLTE-AT laminates use the common building blocks developed with CLTE-XT™ laminates, but with some changes to make the product more affordable. CLTE-AT laminates have “Best-in-Class” Insertion Loss (S21) and Loss
TF-1/TF-2 is made from a polytetrafluoroethylene resin material that’s really great at handling microwaves and high temperatures. It’s mixed with ceramics to boost its performance. One cool thing is that
RT-duroid 6035HTC high-frequency circuit materials are advanced ceramic-filled PTFE composites specifically engineered for use in high-power RF and microwave applications. With a dielectric constant (Dk) of 3.5 at 10 GHz,
XtremeSpeed™ RO1200™ extremely low loss digital circuit materials are ceramic-filled laminates reinforced with woven fiberglass. These materials are specifically engineered to provide exceptional electrical performance and mechanical stability for the
TLY-5 laminates are made from lightweight woven fiberglass, offering superior dimensional stability compared to chopped fiber-reinforced PTFE composites.Its low dissipation factor ensures reliable performance in automotive radar applications operating at
