ROGERS 4003C and ROGERS 4350B have excellent low dielectric loss characteristics. As a result, they provide a more cost-effective and processable high-frequency material selection than PTFE materials.
Shengyi SH260 is a pure polyimide with a high glass transition temperature of 250⁰C laminate and prepreg system, reinforced with a non-woven aramid substrate.One crucial aspect to consider is its
Arlon 85NT is a pure polyimide with a high glass transition temperature of 250⁰C laminate and prepreg system, reinforced with a non-woven aramid substrate.Decomposition temperature of 426°C, compared with 407°C
RO4835™ laminate has excellent thermo-mechanical properties,and electrical characteristics that antenna designers need. The laminates have a dielectric constant (Dk) of 3.48 and a loss tangent (Df) of 0.0037 measured at
The high glass transition temperature (Tg) of VT-447V, typically above 180°C, provides exceptional thermal stability. VT-447V is formulated as a halogen-free material, offering significant environmental and safety advantages over traditional
The VT-464G laminate features a very low Dk value, minimizing signal delay and crosstalk, which is critical for high speed data transmission. With a high Tg exceeding 170°C, VT-464G maintains
The high glass transition temperature (Tg) of VT-447C, typically above 170°C, provides exceptional thermal stability.VT-447C is formulated as a halogen-free material, offering significant environmental and safety advantages over traditional brominated
The high speed VT-463H Laminate is specifically engineered to meet the stringent demands of high speed and high frequency applications,With a high Tg of up to 170°C, VT-463H maintains excellent
PegaClad 1 (TU-1300E) is an advanced material specifically engineered for high-frequency, ultra-low-loss applications. The material offers a dielectric constant of 3.44 at 10GHz, which is stable and consistent over a
RO4360G2™ laminates, characterized by a dielectric constant (Dk) of 6.15, exhibit low loss and are reinforced with glass fibers. Alongside a Dissipation Factor (Df) of just 0.0038 at 10 GHz,
Rogers CuClad 217, CuClad 233 and CuClad 250 series laminates are woven fiberglass/PTFE composite materials for use as printed circuit board substrates.The woven fiberglass reinforcement in CuClad products provides greater
With a stable dielectric constant (Dk) of 3.5, TLF-35A minimizes passive intermodulation distortion (PIMD), ensuring superior signal integrity in high-frequency environments.
The WL-CT series(WL-CT300、WL-CT330、WL-CT330Z、WL-CT338、WL-CT350、WL-CT440、WL-CT615） of organic polymer ceramic fiberglass cloth copper-clad laminates is a high frequency material based on a thermosetting resin system.
TLX Series materials offer unparalleled reliability across a broad spectrum of RF applications. This versatility stems from its dielectric constant (DK) range of 2.45 to 2.65, along with a variety
The dielectric constant of this TFA series is 2.94, 3.0, 6.15, 10.2. With the same level of dielectric constant excellent electrical properties, thermal properties, mechanical properties, is aerospace grade high
The glass transition temperature of MEGTRON6 R-5775(N) laminate is 185 degrees Celsius.Panasonic MEGTRON6 R-5775(N) laminate is a High speed and low loss material, this material features excellent thermal performance.The electrical
The Panasonic R-1566(W) is a highly efficient laminate used for bonding several layers of multilayer boards. Panasonic R-1566(W) features a glass transition temperature of 148 degree Celsius. it is advisable
The Panasonic R-1766 PCB material is characterized by a glass transition temperature (Tg) of 140 degrees Celsius. The Panasonic R-1766 exhibits a dielectric constant of 4.3 at 1 GHz. And
Shengyi AEROWAVE 300 laminate is a high-performance, low-loss PCB material specifically engineered for advanced RF and microwave applications. With a dielectric constant (3.0 @10GHz), AeroWave 300 laminate maintains excellent dielectric
Shengyi SCGA-500 GF220 is a low-loss PTFE woven glass PCB material, specifically engineered for high-frequency applications. With a dielectric constant of 2.20(±0.02) at 10GHz, the laminate maintains outstanding dielectric stability
SYNAMIC9GN laminate have a dielectric constant (DK 3.34 @10GHz) and the dissipation factor (Df) of just 0.0014 at 10 GHz, very Low Df values result in minimal signal loss, with
This is a halogen-free build-up material for printed wiring boards. MGC's halogen-free material achieves the UL94 V-0 flame retardancy level not only without using brominated flame retardants or antimony compounds
The DS-7409HG laminate demonstrates a dielectric constant of 4.6 at 1 GHz. The frequency significantly influences this value, with the dielectric constant decreasing as the frequency increases. A dissipation factor
The DS-7409HG(IQ) laminate demonstrates a dielectric constant of 4.3 at 1 GHz. The frequency significantly influences this value, with the dielectric constant decreasing as the frequency increases. A dissipation factor
