RT/duroid® 5870 and 5880 glass microfiber rein forced PTFE composites are designed for exacting strip line and micro strip circuit applications. the two products in this family are RT/duroid 5870
ROGERS 4003C and ROGERS 4350B have excellent low dielectric loss characteristics. As a result, they provide a more cost-effective and processable high-frequency material selection than PTFE materials.
RO4835™ laminate has excellent thermo-mechanical properties,and electrical characteristics that antenna designers need. The laminates have a dielectric constant (Dk) of 3.48 and a loss tangent (Df) of 0.0037 measured at
ThunderClad 4R (TU-943R) laminate features a dielectric constant (Dk) of 3.22 at 10GHz, ensuring consistent signal performance across a wide range of frequencies. With a dissipation factor (Df) of 0.0015
TSM-DS3 is a thermally stable, industry leading low loss core (Df = 0.0011 at 10 GHz) that can be manufactured with the predictability and consistency of the best fiberglass reinforced
The WL-CT series(WL-CT300、WL-CT330、WL-CT330Z、WL-CT338、WL-CT350、WL-CT440、WL-CT615） of organic polymer ceramic fiberglass cloth copper-clad laminates is a high frequency material based on a thermosetting resin system.
TP material stands out as a distinctive high-frequency thermoplastic in the industry. The dielectric layer of the TP laminate is uniquely composed of a blend of ceramic and polyphenylene oxide
TLX Series materials offer unparalleled reliability across a broad spectrum of RF applications. This versatility stems from its dielectric constant (DK) range of 2.45 to 2.65, along with a variety
The dielectric constant of this TFA series is 2.94, 3.0, 6.15, 10.2. With the same level of dielectric constant excellent electrical properties, thermal properties, mechanical properties, is aerospace grade high
F4BTM and F4BTME laminates offer a dielectric constant (DK) ranging from 2.98 to 3.50, selectable based on design needs. Lower DK variants enable wider impedance control and reduced signal delay,
CER-10 is an organic-ceramic DK-10 laminate belonging to the ORCER family of Taconic products. It features a woven glass reinforcement, which contributes to its exceptional interlaminar bond strength and solder
Shengyi SCGA-500 GF220 is a low-loss PTFE woven glass PCB material, specifically engineered for high-frequency applications. With a dielectric constant of 2.20(±0.02) at 10GHz, the laminate maintains outstanding dielectric stability
Shengyi SCGA-500 GF255 is a low-loss PTFE woven glass PCB material, specifically engineered for high-frequency applications. With a dielectric constant of 2.55(±0.04) at 10GHz, the laminate maintains outstanding dielectric stability
Shengyi SCGA-500 GF265 is a low-loss PTFE woven glass PCB material, specifically engineered for high-frequency applications. With a dielectric constant of 2.65(±0.04) at 10GHz, the laminate maintains outstanding dielectric stability
Shengyi SCGA-500 GF300 laminate is a low-loss PTFE woven glass PCB material, specifically engineered for high-frequency applications. With a dielectric constant of 3.00(±0.04) at 10GHz, the laminate maintains outstanding dielectric
Shengyi SG7350D2 laminate have a low dielectric constant of 3.55 at 10 GHz, maintains outstanding dielectric stability across various frequency and temperature ranges. Shengyi SG7350D2 laminate is a high-performance laminate
The LNB33 laminate is characterized by a high glass transition temperature (Tg) exceeding 280°C. The dielectric constant (Dk) of LNB33 laminate is approximately 3.30±0.05 at 10 GHz (as per IPC-TM-650
The LNB33C laminate is characterized by a high glass transition temperature (Tg) exceeding 280°C.The dielectric constant (Dk) of LNB33C laminate is approximately 3.30 ± 0.05 at 10 GHz (as per
The RT duroid 6006 laminate features a dielectric constant of 6.15, while the RT duroid 6010LM laminate exhibits a dielectric constant of 10.2. RT duroid 6006 and 6010LM microwave laminates
RF-30A is an organic-ceramic laminate with woven glass reinforcement. It combines ceramic filler and PTFE coating technology. RF-30A exceeds design requirements in electrical and mechanical properties. When paired with low-profile
F4BTMS series（F4BTMS220、F4BTMS233、F4BTMS255、F4BTMS265、F4BTMS294、F4BTMS300、F4BTMS350、F4BTMS430、F4BTMS450、F4BTMS615、F4BTMS1000） is the upgraded version of the F4BTM series. Significant technical advancements have been achieved in material formulation and production processes
Rogers CLTE-XT PTFE laminate have a dielectric constant (Dk) of 2.94 at 10 GHz at the same frequency, CLTE-XT ensures minimal signal degradation and excellent efficiency. It's ultra-low loss tangent
With a DK range available from 2.17 to 3.0, these laminates can be fine-tuned to meet specific performance requirements. Both F4BM and F4BME exhibit excellent low loss characteristics, ensuring minimal
